MCT-302 is a fully supervised PowerCode™ magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.

An additional hard-wired, end-of-line (EOL) protected input can be used, with normally open (NO) and normally closed (NC) pushbuttons, sensors, contacts, switches and other detection devices, for a variety of security and control applications. The MCT-302 T offers an additional back tamper switch for detecting removal of the device from its place to comply with the latest European EN standards requirements.

When activated, the magnetic contact and the auxiliary input initiate an individual 24-bit PowerCode ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce.

A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times.

These unique top quality devices are available in several optional frequencies in compliance with European, U.S. and other international standards. Each transmitter is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced.

MCT-302 Features:

• Magnetic contact and auxiliary input for external devices
• User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors)
• Back tamper switch detects removal from place (model MCT-302 T)
• Superior transmission range
• Fully supervised
• PowerCode ID factory-selected from 16 million possible combinations
• Smart anti-collision mechanism supports multiple simultaneous transmissions
• Long-life standard lithium battery included
• Low-battery signaling
• Compatible with PowerMax® and all Visonic PowerCode wireless panels and receivers

MCT-234 is a 4-button miniature wireless CodeSecure™ keyfob transmitter designed for arming and disarming wireless security systems, and for emergency signaling, access control, home automation and remote control applications.

When activated, each button initiates a CodeSecure transmission of a unique 28-bit (rolling code) ID command, selected from over 100 million possible combinations. To prevent “code grabbing” by potential intruders trying to defeat the security system, the next time the button is activated, the transmitter sends out a different CodeSecure ID, which is selected by a proprietary code encryption algorithm and which can be recognized only by the target receiver.

This attractive miniature keyfob is available in several optional frequencies in compliance with European, U.S and other international standards. It is powered by a standard alkaline battery and features visible and transmitted low battery indications when the battery needs to be replaced.

MCT-234 Features:

• Four independent functional buttons
• Comfortable, miniature, attractive design
• Superior transmission range
• CodeSecure encryption technology prevents unauthorized “code grabbing”
• CodeSecure ID factory-selected from over 100 million possible code combinations
• Standard Alkaline battery
• Visible and transmitted low battery indication
• Available in several optional frequencies in compliance with international standards
• Compatible with PowerMax® and all Visonic PowerCode wireless panels and receivers

MCM-140 is the universal wireless portable remote control unit for the PowerMax® and other Visonic PowerCode™ security and home automation systems. It enables easy arming and disarming of the programming of the PowerMax system. Among other functions, MCM-140 also enables controlling X-10 devices from anywhere in the home or office, using PowerMax keypad commands.

MCM-140 employs Visonic’s PowerCode wireless technology featuring 16 million possible code combinations and smart, anti-collision transmission algorithms. For arming, disarming and security functions, the MCM-140 utilizes Visonic’s CodeSecure™ wireless technology. Featuring over 100 million possible combinations and proprietary rolling code encryption algorithm, CodeSecure prevents “code grabbing” by potential intruders.

This ergonomically designed remote commander is available in several optional frequencies in compliance with European, U.S. and other international standards. It is powered by a standard long life Lithium battery with visible and transmitted low battery alarms. A wall-mounted bracket enables mounting the unit in the most convenient place.

MCM-140 Features:

• Easy programming and user-friendly control of PowerMax system
• Attractive, modern, ergonomic design for hand-held use or wall mounting
• Back light illumination
• Visual indications with three color-coded LEDs
• Audible signals confirm user commands
• Superior transmission range
• PowerCode technology with anti-collision transmission algorithm
• CodeSecure encryption technology prevents unauthorized “code grabbing”
• Long-life standard lithium battery
• Automatic reporting of low battery
• Available in several optional frequencies in compliance with international standards
• Compatible with PowerMax and other Visonic PowerCode wireless systems

Next+ K9-85 MCW is a PowerCode wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic’s patented “Target Specific Imaging™” optical system (TSI) and unique pet identification software algorithm, the Next+ K9-85 MCW has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).

Next+ K9-85 MCW is a fully supervised wireless detector with anti-collision PowerCode technology. It is compatible with PowerMax®; and all Visonic PowerCode; wireless panels and receivers. Next+ K9-85 MCW implements a whole new generation of patented technologies including FM Digital Signal Processing (FM-DSP), “True Motion Recognition”™ with Fuzzy Logic algorithm” (TMR), and state-of-the-art 3D
cylindrical optics.

The result is the industry’s best detection accuracy, false alarm immunity and ultimate long term reliability – in an attractive, easily installed wireless detector designed for any pet-loving home environment.

Next+ K9-85 MCW Features:

• Pet-tolerant for animals up to 38 kg (85 lb)
• 15m (50 ft) 90o multiple-curtain coverage with creep zone
• Enhanced false alarm immunity by combined Fresnel and cylindrical optics
• Fully supervised wireless detector with anti-collision PowerCode technology
• Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
• 3 Volt long life high power standard Lithium battery
• Long-term stability and reliability thanks to advanced true digital FM processing
• Industry’s best catch performance based on proprietary Target Specific Imaging and 3D cylindrical optics
• Ultimate false alarm immunity based on patented True Motion Recognition with exceptionally high sampling rates and “Event Verification” algorithm
• Fast and easy adjustment-free installation
• Attractive sleek design suitable for any home or office environment
• Meets EN50131-2 European standards

The Wireless Receiver connects to the PIMA Hunter-Pro or Captain 8 system via the keypad’s secured 4-wire SecuBUS, enabling the addition of up to 32 wireless zones through a menu-driven, simple programming setup.

Features:

• Fully integrated with the control panel
• Connects to the system’s SecuBUS
• Supports all Visonic PowerCodeTM wireless devices
• Up to 32 supervised wireless zones
• Up to 24 key-fobs
• All programming can be done via the PIMA LCD keypad

Discovery PIR MCW is a fully supervised wireless PIR detector with advanced anti-collision technology, compatible with PowerMax and all Visonic PowerCode™ wireless panels and receivers. It is approved and available in various frequency bands according to international standards.

Discovery PIR MCW implements a new generation of patented technologies, including advanced Digital Signal Processing (DSP), “True Motion Recognition™” using Fuzzy Logic algorithm (TMR) and advanced wireless transmission techniques.

Technical superiority, high reliability, excellent performance, elegant design, durability and installation flexibility make the Discovery PIR MCW the ideal supervised wireless detector for professional installers and end-users alike.

Discovery PIR MCW Features:

• Fully supervised wireless detector with anti-collision PowerCode technology
• Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
• 3 Volt long life high power standard Lithium battery
• Long-term stability and reliability thanks to advanced true digital processing
• Ultimate false alarm immunity based on patented True Motion Recognition with “Event Verification” algorithm
• Sealed optics protects from insects and air currents
• Integral swivel bracket for ceiling or wall mounting, simplifies installation and control of the detection pattern
• Durable and elegant design
• Suitable for residential, commercial and light industrial applications
• Approved and available in various frequency bands according to international standards